Stainless Steel 2pc Thread Ball Valve

2PC ball valves are two-piece valves with a ball inside that rotates to control the flow of a fluid or gas. The ball has a hole drilled through the center and can be rotated to align with the flow, allowing the fluid to pass through, or turned 90 degrees to block the flow. The two-piece design allows for easy maintenance and repair.

Stainless Steel 3pc Thread Ball Valve

The three-piece ball valve and the gate valve are the same type of valve.

Strainer

This Japanses industrial standard specifies that application of strainers used for piping systems for oil, water and steam.

Butterfly Valve

Marine Butterfly valves are used either for being fully opened or closed, as well as for flow regulation duties.

Cast Iron Rising Stem Gate Valve

The valve has the characteristics of light switch, reliable sealing, elastic memory, long service life, etc., and can be widely used in fluid pipelines such as tap water, sewage, construction, food, electricity, medicine, metallurgy, textile, and energy systems as a regulating and intercepting device.

Cast Iron Swing Check Valve

The main task of check valves in the pipe lines is to prevent the possibility of reverse flow of the fluid when the fluid stops.

Cast Iron Rising Stem Gate Valve 150LB

Cast iron stem gate valve is characterised as having either a rising or a non-rising stem and are produced at HY Valves according to Korea standard KS B2350, and it can also according to DIN 3204 and DIN 3216 standards.

Cast iron Y Strainer 10K/PN10/PN16

Y-strainers are devices that mechanically remove unwanted solids from liquid, gas or steam pipelines by means of perforated or metal mesh filter elements. They are used in pipelines to protect pumps, instruments, control valves, steam traps, regulators and other process equipment.