Marine Cast Iron Globe Valve

JIS MARINE CAST IRON GLOBE VALVE F7305-1983 DN15-DN40

DIN Cast Steel Bellows Seal Gate Valve

Size range : DN50-DN600 Class: PN16-PN160 Temperature : ≤425 ºC Fig No. : WJ41H  Technical specification: Design Standard: DIN 3352 Face To Face: DIN 3202 Flange ends: EN 1092-1/DIN 2544 Test & Inspection: ISO 5208/EN12266/DIN 2545

Stainless Steel 2pc Thread Ball Valve

2PC ball valves are two-piece valves with a ball inside that rotates to control the flow of a fluid or gas. The ball has a hole drilled through the center and can be rotated to align with the flow, allowing the fluid to pass through, or turned 90 degrees to block the flow. The two-piece design allows for easy maintenance and repair.

Stainless Steel 3pc Thread Ball Valve

The three-piece ball valve and the gate valve are the same type of valve.

Marine Cast Bronze Valves

Marine Globe valves and angle valves are found wide applications generally in flow regulation duties and also applicable to duties under high temperature pressure.

Marine Cast Steel Valves

Cast Steel Storm valves are used in marine applications, which are used on the waste circuits system.

Cast Iron Flange Connection Ball Valve

Two-piece full-bore ball valves have a spherical disc that opens and closes the flow of fluid. The valve is manufactured to industry standards for pipeline closure applications. Valves are mechanical devices that control flow and ensure pressure in a piping system or process.The valves are fully manual operated without any additional gearing or power assist. It should be equipped with a blue or

Cast Iron Swing Check Valve

The main task of check valves in the pipe lines is to prevent the possibility of reverse flow of the fluid when the fluid stops.